Uluslararası hakemli dergilerde
yayınlanan makaleler :
A1) Kaya, C., Kaya, F., Su, B., Thomas, B., Boccaccini, A.R.
Structural and functional thick ceramic coatings by electrophoretic deposition
(2005) Surface and Coatings Technology, 191 (2-3), pp. 303-310. Cited 2 times.
A2) Kaya, C., Blackburn, S.
Extrusion of alumina ceramic tubes with controlled bends
(2005) Journal of Materials Science, 40 (8), pp. 2007-2011.
A3) Boccaccini, A.R., Atiq, S., Boccaccini, D.N., Dlouhy, I., Kaya, C.
Fracture behaviour of mullite fibre reinforced-mullite matrix composites under quasi-static and ballistic impact loading
(2005) Composites Science and Technology, 65 (2), pp. 325-333. Cited 1 time.
A 4) Kaya, C., Blackburn, S.
Extrusion of ceramic tubes with complex structures of non-uniform curvatures made from nano-powders
(2004) Journal of the European Ceramic Society, 24 (14), pp. 3663-3670. Cited 2 times.
A 5) Boccaccini, A.R., Karapappas, P., Marijuan, J.M., Kaya, C.
TiO2 coatings on silicon carbide and carbon fibre substrates by electrophoretic deposition
(2004) Journal of Materials Science, 39 (3), pp. 851-859. Cited 8 times.
A6) Poulon-Quintin, A., Berger, M.H., Bunsell, A.R., Kaya, C., Butler, E.G., Wootton, A., Lewis, M.H.
Processing and structures of bi-phase oxide ceramic filaments
(2004) Journal of the European Ceramic Society, 24 (1), pp. 101-110. Cited 2 times.
A 7) Kaya, C.
Al2O3-Y-TZP/Al2O3 functionally graded composites of tubular shape from nano-sols using double-step electrophoretic deposition
(2003) Journal of the European Ceramic Society, 23 (10), pp. 1655-1660. Cited 8 times.
A 8) Kaya, C., Kaya, F., Atiq, S., Boccaccini, A.R.
Electrophoretic deposition of ceramic coatings on ceramic composite substrates
(2003) British Ceramic Transactions, 102 (3), pp. 99-102. Cited 2 times.
A 9) Kaya, C., Butler, E.G., Lewis, M.H.
Co-extrusion of Al2O3/ZrO2 bi-phase high temperature ceramics with fine scale aligned microstructures
(2003) Journal of the European Ceramic Society, 23 (6), pp. 935-942. Cited 10 times.
A 10) Kaya, C., Butler, E.G.
Near net-shape manufacturing of alumina/zirconia high temperature ceramics with fine scale aligned multiphase microstructures using co-extrusion
(2003) Journal of Materials Processing Technology, 135 (2-3 SPEC.), pp. 137-143.
A 11) Kaya, C., Butler, E.G., Lewis, M.H.
Microfabrication of Al2O3/ZrO2 bi-phase ceramics with continuous fibrillar microstructure by co-extrusion
(2003) Journal of Materials Science Letters, 22 (5), pp. 357-361. Cited 1 time.
A 12) Kaya, C., Butler, E.G., Lewis, M.H.
Microstructurally controlled mullite ceramics produced from monophasic and diphasic sol-derived pastes using extrusion
(2003) Journal of Materials Science, 38 (4), pp. 767-777. Cited 1 time.
A 13) Kaya, C., Butler, E.G.
Zirconia-toughened alumina ceramics of helical spring shape with improved properties from extruded sol-derived pastes
(2003) Scripta Materialia, 48 (4), pp. 359-364. Cited 1 time.
A 14)Kaya, C., Boccaccini, A.R.
Microstructural variations in mullite ceramics derived from diphasic sols using different forming techniques
(2002) Journal of Materials Research, 17 (12), pp. 3000-3003. Cited 1 time.
A 15) Kaya, C., Butler, E.G., Selcuk, A., Boccaccini, A.R., Lewis, M.H.
Mullite (NextelTM 720) fibre-reinforced mullite matrix composites exhibiting favourable thermomechanical properties
(2002) Journal of the European Ceramic Society, 22 (13), pp. 2333-2342. Cited 17 times.
A 16) Kaya, C., Butler, E.G.
Plastic forming and microstructural development of α-alumina ceramics from highly compacted green bodies using extrusion
(2002) Journal of the European Ceramic Society, 22 (12), pp. 1917-1926. Cited 5 times.
A 17) Kaya, C., Kaya, F., Boccaccini, A.R.
Electrophoretic deposition infiltration of 2-D metal fibre-reinforced cordierite matrix composites of tubular shape
(2002) Journal of Materials Science, 37 (19), pp. 4145-4153. Cited 6 times.
A 18) Kaya, C., Kaya, F., Boccaccini, A.R.
Fabrication of stainless-steel-fiber-reinforced cordierite-matrix composites of tubular shape using electrophoretic deposition
(2002) Journal of the American Ceramic Society, 85 (10), pp. 2575-2577. Cited 4 times.
A 19) Kaya, C., Kaya, F., Mori, H.
Non-destructive damage evaluation of cyclic-fatigued alumina fiber-reinforced mullite ceramic matrix composites using forced resonance and acoustic emission techniques
(2002) Journal of Materials Science Letters, 21 (17), pp. 1333-1335.
A 20) Kaya, C., He, J.Y., Gu, X., Butler, E.G.
Nanostructured ceramic powders by hydrothermal synthesis and their applications
(2002) Microporous and Mesoporous Materials, 54 (1-2), pp. 37-49. Cited 15 times.
A 21) Kaya, C., Kaya, F., Mori, H.
Damage assessment of alumina fibre-reinforced mullite ceramic matrix composites subjected to cyclic fatigue at ambient and elevated temperatures
(2002) Journal of the European Ceramic Society, 22 (4), pp. 447-452. Cited 2 times.
A 22) Kaya, C., Gu, X., Al-Dawery, I., Butler, E.G.
Microstructural development of woven mullite fibre-reinforced mullite ceramic matrix composites by infiltration processing
(2002) Science and Technology of Advanced Materials, 3 (1), pp. 35-44. Cited 8 times.
A 23) Boccaccini, A.R., Kaya, C.
Alumina ceramics based on seeded boehmite and electrophoretic deposition
(2002) Ceramics International, 28 (8), pp. 893-897. Cited 2 times.
A 24) Kaya, C., Kaya, F., Boccaccini, A.R.
Colloidal processing of glassy-phase-free mullite from heterocoagulated boehmite/silica nanocomposite sol particles
(2002) Advanced Engineering Materials, 4 (1-2), pp. 21-28+5. Cited 1 time.
A 25) Kaya, C., Boccaccini, A.R.
Colloidal processing of complex shape stainless steel woven fiber mat reinforced alumina ceramic matrix composites using electrophoretic deposition
(2001) Journal of Materials Science Letters, 20 (16), pp. 1465-1467. Cited 12 times.
A 26) Boccaccini, A.R., Kaya, C., Chawla, K.K.
Use of electrophoretic deposition in the processing of fibre reinforced ceramic and glass matrix composites: A review
(2001) Composites - Part A: Applied Science and Manufacturing, 32 (8), pp. 997-1006. Cited 22 times.
A 27) Boccaccini, A.R., Kaya, C., Krüger, H.-G.
Application of the Electrophoretic Deposition Technique in the Fabrication of Fibre Reinforced Ceramic and Glass Matrix Composites - A Review [Elektrophoretische Abscheidung zur Herstellung von faserverstärkten Keramik- und Glasmatrix-Verbundwerkstoffen -Eine Übersicht]
(2001) Chemie-Ingenieur-Technik, 73 (5), pp. 443-452. Cited 5 times.
A 28) Kaya, C., Kaya, F., Boccaccini, A.R., Chawla, K.K.
Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition
(2001) Acta Materialia, 49 (7), pp. 1189-1197. Cited 24 times.
A 29) Kaya, C., Boccaccini, A.R., Chawla, K.K.
Electrophoretic deposition forming of nickel-coated-carbon-fiber-reinforced borosilicate-glass-matrix composites
(2000) Journal of the American Ceramic Society, 83 (8), pp. 1885-1888. Cited 23 times.
A 30) Kaya, C., Boccaccini, A.R., Trusty, P.A.
Processing and characterisation of 2-D woven metal fibre-reinforced multilayer silica matrix composites using electrophoretic deposition and pressure filtration
(1999) Journal of the European Ceramic Society, 19 (16), pp. 2859-2866. Cited 19 times.
A 31) Kaya, C., Kaya, F., Trusty, P.A., Boccaccini, A.R., Marsoglu, M.
On the toughening mechanisms of SiC platelet-reinforced Al2O3/Y-TZP nano-ceramic matrix composites
(1999) Ceramics International, 25 (4), pp. 359-366. Cited 1 time.
A 32) Kaya, C., Kaya, F., Marsoglu, M.
Processing, toughness improvement and microstructural analysis of SiC platelet-reinforced Al2O3/Y-TZP nano-ceramic matrix composites
(1998) Materials Science and Engineering A, 247 (1-2), pp. 75-80. Cited 2 times.
A33) Kaya, C., Trusty, P.A., Ponton, C.B.
Preparation of heterocoagulated colloidal suspensions for fabrication of ceramic matrix composites by electrophoretic filtration deposition
(1998) British Ceramic Transactions, 97 (2), pp. 48-54. Cited 10 times.
A 34) Kaya, C., Kaya, F., Marsoglu, M.
Multiple-toughening behaviour in SiC platelet-reinforced TZP/Al2O3 ceramic composites
(1997)
Journal of Materials Science Letters, 16 (11), pp. 892-896. Cited 2 times.
Uluslararası bilimsel toplantılarda sunulan
ve bildiri kitabında (Proceedings)
basılan bildiriler :
1. Kaya C, Processing of oxide/oxide composite components for efficient energy conversion applications (INVITED), in the proceeding of The 107th Annual Meeting & Exposition of The American Ceramic Society, co-located with the 1st International Conference on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT), editors N. P.Bansal, J.P. Singh, W.M.Kriven, Ceramics Transactions, Vol.175, 27-36, Baltimore, USA, 10-13 April 2005.
2. Kaya C; Kaya F and
Butler E. G., New generation oxide/oxide composites for efficient energy
conversion applications, in the proceeding of The International Conference on
Vehicles, Alternative Fuel Systems and Environmental Protection, editor A. G.
Olabi, 110-113, Dublin, Ireland, 6-9 July 2004.
3. Boccaccini,
AR; Kaya, C
“The use of electrophoretic deposition for
the fabrication of ceramic and glass matrix composites” ADVANCES IN CERAMIC
MATRIX COMPOSITES IX, 57-66, 2003
Editor(s): Bansal, NP; Singh, JP; Kriven, WM; Schneider, H,
International Symposium on Recent Advances in Ceramic Matrix Composites, APR
27-30, 2003.
CERAMIC TRANSACTIONS, 153.
4. Kaya, C; Chawla,
KK; Boccaccini, AR
“Processing of oxide and non-oxide lightweight
ceramic composites suitable for high temperature applications using
electrophoretic deposition
ELECTROPHORETIC DEPOSITION: FUNDAMENTALS
AND APPLICATIONS,
PROCEEDINGS, 263-270, 2002, Editor(s): Boccaccini,
AR; VanDerBlest, O; Talbot, JB,
1st Interntional Conference on Electrophoretic Deposition, AUG 18-22, 2002,
ELECTROCHEMICAL SOCIETY SERIES, 2002(21).
5.
Kaya C, R. J. Huzzard and S. Blackburn, Influence of paste formulation on tubes
with controlled bends, in the proceedings of "Shaping II, Second
International Conference on Shaping of Advanced Ceramics ", edited by Jan
Luyten, Jean-Pierre Erauw. Gent,
Belgium, October
24-26, 309-314, 2002,
6. Kaya, C, E. G. Butler
and M. H. Lewis, Microfabrication of damage-tolerant Al2O3/ZrO2
fibril composites via aligned bi-phase microlaminae using co-extrusion, in
Proceedings of High temperature ceramic matrix composites, edited by W.
Krenkel, R. Naslain and H. Schneider, Wiley-VCH, Germany, p. 645-650. 1-3
October 2001, Munich, Germany.
7.
Kaya, C, E. G. Butler, A. R. Boccaccini and M. H. Lewis, Processing and
Characterisation of mullite (NextelTM 720) fibre-reinforced mullite
matrix composites from hydrothermally processed mullite precursor, Published in
Proceedings of High temperature ceramic matrix composites, edited by W.
Krenkel, R. Naslain and H. Schneider, Wiley-VCH, Germany, p. 639-644. 1-3
October 2001, Munich, Germany.
8. Boccaccini,
AR; Kaya, C
Glass and glass-ceramic matrix composites:
from model systems to useful materials
ADVANCED FIBERS, PLASTICS, LAMINATES AND
COMPOSITES, 277-288, 2002, Editor(s): Wallenberger, FT; Weston, NE;
Ford, R; Wool, RP; Chawla, K
Symposium on Advanced Fibers, Plastics,
Laminates and Composites held at the 2001 MRS, Fall Meeting , NOV 26-30, 2001
MATERIALS RESEARCH SOCIETY SYMPOSIUM
PROCEEDINGS, 702.
9. Boccaccini,
AR; Kaya, C; Kruger, HG
Application of the electrophoretic
deposition technique in the fabrication of fibre reinforced ceramic and glass
matrix composites - A review, CHEMIE INGENIEUR TECHNIK, 73 (5): 443-452, MAY
2001, 285th SFB Colloquium on Particle Internation in Mechanical Process
Technology: Basics and
Applications , SEP 27-29, 2000.
10. Kaya, C; Trusty,
PA; Ponton, CB
Characterisation of nano-sized colloidal
suspensions for the preparation of multilayer alumina fibre-reinforced mullite
CMCs using electrophoretic filtration deposition (EFD), BETTER CERAMICS THROUGH
PROCESSING, 93-101, 1998
Editor(s): Binner, J; Yeomans, J, Conference on Better
Ceramics Through Processing, APR 21-22, 1998, BRITISH CERAMICS PROCEEDINGS(58).
11. Kaya C, M. Marsoglu and
T. Baykara, The effect of sintering conditions on the mechanical properties and
microstructural characteristics of Al2O3-(3Y-TZP) ceramics, in the proceedings
of the 4th European Conference on Advanced Materials and Processes,
Venice, Italy, edited by Assiciazione Italiana di Metallurgia, 55-60 (1995).
12. Kaya C and M. Marsoglu,
Fracture toughness determination and quantitative phase analysis of Al2O3-ZrO2
ceramics, in Proceedings of the European Metallographic Conference,
EURO-MET 95, Friedrichshafen, Germany, edited by Deutsche Gesellschaft fur
Materialkunde e. V, 419-424 (1995).
13. Kaya, C; Trusty,
PA; Ponton, CB
Electrophoretic filtration deposition (EFD)
of Saffil alumina fibre-reinforced mullite multiplayer nano-ceramic matrix
composites, CERAMIC PROCESSING SCIENCE, 399-406, 1998, Editor(s): Messing,
GL; Lange, FF; Hirano, SI
6th Meeting of the International
Conference on Ceramic Processing Science, SEP 07-10, 1997 CERAMIC TRANSACTIONS,
83.
Ulusal hakemli
dergilerde yayınlanan makaleler
Ulusal bilimsel toplantılarda sunulan ve bildiri
kitaplarında basılan bildiriler:
Yazılan
uluslararası kitaplar veya kitaplarda bölümler :
Diğer yayınlar
:
Atıflar:
SCI
kapsamındaki hakemli dergilerde toplam 34 yayın ve bunlara yapılan 219 atıf
(13.12.2006 tarihi itibarıyla)
bulunmaktadir. Uluslararası konferanslarda (biri davetli olmak üzere)
sunulan 13 ve ulusal konferanslarda sunulan 4 bildirisi bulunmaktadır.
|
YAYIN NO
|
ATIF SAYISI
|
|
A1
|
2
|
|
A 2
|
-
|
|
A 3
|
1
|
|
A 4
|
2
|
|
A 5
|
8
|
|
A 6
|
2
|
|
A 7
|
8
|
|
A 8
|
2
|
|
A 9
|
10
|
|
A 10
|
-
|
|
A 11
|
1
|
|
A 12
|
1
|
|
A 13
|
1
|
|
A 14
|
1
|
|
A 15
|
17
|
|
A 16
|
5
|
|
A 17
|
6
|
|
A 18
|
4
|
|
A 19
|
-
|
|
A 20
|
15
|
|
A 21
|
2
|
|
A 22
|
8
|
|
A 23
|
2
|
|
A 24
|
1
|
|
A 25
|
12
|
|
A 26
|
22
|
|
A 27
|
5
|
|
A 28
|
24
|
|
A 29
|
23
|
|
A 30
|
19
|
|
A 31
|
1
|
|
A 32
|
2
|
|
A 33
|
10
|
|
A 34
|
2
|
|
TOPLAM
|
219
|