Prof. Dr. Surkay D. Akbarov Yıldız Teknik Üniversitesi - Matematik Mühendisliği Bölümü

ULUSLARARASI BİLİMSEL TOPLANTILARDA SUNULAN VE BİLDİRİ KİTABINDA BASILAN BİLDİRİLER

1. S.D. Akbarov, On the stressed state in the infinite viscoelastic matrix, reinforced by a single curved fiber, Greep in structures: abstracts of reports at the II All-union conference (novosibirsk, 1984). Novosibirsk Pp. 96–97, 1984.

2. S.D. Akbarov, On the influence of the form of local curving in the structure of laminated composites on the distribution of self-equilibrated stresses (model of piecewise homogenous body), Proceedings of the VI All-union conference on composite materials. in two volumes, Erevan- V. 2, Pp. 20–22, 1987.

3. S.D. Akbarov, On the mechanism of composite materials fracture, resulting from the curving of reinforcing elements, Structural Fracture Mechanism of Composites: abstracts of reports on the Ii all-union seminar on mechanics and technology of composites, Chernogolovka, pp.5-6, 1988.

4. S.D. Akbarov and E.A. Movsumov, On the method of problems solution in mechanics of materials with curved layers in geometrically non-linear formulation, Abstracts of report on the III all-union conference on the non-linear elasticity theory, Sıktıvkar Pp.130-131, 1989 (in Russian).

5. S.D. Akbarov, T.Sisman and N.Yahnioglu, On the fracture of the unidirectional composites in compression, ICCE/3 Third. Int. Con. on Comp. Eng., Pp.53-55, 1996.

6. S.D. Akbarov and N.Yahnioglu, On the finite element analysis of the influenced of the local structural damage of the multilayered thich plate material to the stress distribution, in "Damage and Fracture Mechanics" Eds: C.A. Birebbia and A. Carpinteri, Computational Mech. Pub., Southampton, UK., Boston USA, 1998, Pp:187-196.

7. S.D. Akbarov and A.Cilli, On the determination of the theoretical strength limit in compression of viscoelastic unidirectional composite materials. 2nd Pacific-Asia Conference On Mechanical Engineering, September 9–11, 1998 Manila, Philippines. 1998.

8. S.D. Akbarov and A.Cilli, On the determination of the theoretical strenght limit in compression of unidirectional composite materials, Continuum Models and Discrete Systems 9 (CMDS9), 29 June-3 July 1998, Istanbul (Turkey), Pp. 74-80.

9. S.D. Akbarov and N. Yahnioglu, The method for investigation of the general theory of stability problems of structural elements fabricated from the viscoelastic composite materials, Sixth Ann. Int. Conf. On Comp. Eng.(ICCE/6) June 27-July 3, 1999 Orlando, Florida, Pp:905–906.

10. S.D. Akbarov and R. Kosker, Micro-buckling of a fiber in viskoelastic matrix, Seventh Annual International Conference on Composites Enginering (ICCE/7), July 2-8, 2000 Denver Colorado, Pp: 477-478, 2000.

11. S.D. Akbarov and S. Selim, Stability of strip fabricated from the multilayered composite material with locally curved structures, Int. Conf. Composites Engineering 7, Denver, July 2-8 2000, Pp. 785-786, 2000.

12. S.D. Akbarov and M Ozisik, Longitudinal wave propagation in half plane covered with pre-stressed layer. Eighth Annual International Conference On Composites Enginering (ICCE/8), August 5–11, 2001, Pp. 707–708.

13. S.D. Akbarov and R. Kosker, Stress distribution in the infinite elastic body with two neighbouring periodical curved fibers. Eighth Annual International Conference On Composites Enginering (ICCE/8), August 5–11, 2001, Pp. 489–490.

14. S.D. Akbarov and I. Demiriz, Natural vibrarion of the thick plate fabricated from the spatially curved composite. Eighth Annual International Conference On Composites Enginering (ICCE/8), August 5–11, 2001, Pp. 11–12.

15. S.D. Akbarov, Failure of the unidirectional composites in compression. 5th. International Fracture Conference, 6–8 Eylül, 2001, Pp. 3–10.

16. S.D. Akbarov and M. Özışık, Longitudinal wave propagation in half-plane covered with pre-stressed layer, Eighth Annual International Conference on Composites Engineering, August 5-11, Tenerife, Canary İslands, Spain, Pp. 707-708.

17. S.D. Akbarov and S. Selim, FEM Analyses of The Three-Dimensional Buckling Problem of The Clamped Rectangular Thick Plate From Viscoelastic Composites , Mechanics of Comp. Mater., Riga, LATVIA, 9-13 June 2002, Pp. 177, 2002.

18. S.D. Akbarov and I. Demiriz, Stress Analysis In The Rectangular Thick Plate From Composite Material With Periodic Spatially Curved Structure Under Forced Vibration , Twelfth International Conference Mechanics of Composite Materials (MCM-2002), 9-13 Haziran 2002, Letonya.

19. S.D. Akbarov and R Kosker, Stress Distribution in the Infinite Elastic Body with Two Neighboring Periodical Curved Fibers under Geometrical Non-Linear Statement, Twelfth International Conference Mechanics of Composite Materials (MCM-2002), June 9-13, 2002, Riga, Latvia.

20. S.D. Akbarov and E.T. Tarim, Three-dimensional stress analysis for a thick plate fabricated from a composite material with spatial locally curved structure, Mechanics of Composite Materials (MCM-2002), June 9-13, 2002 Riga, Latvia, pp.204, 2002.

21. S.D. Akbarov, N. Yahnioglu and A.Mermer Yucel, On the influence of the initial tension of the strip with rectangular hole to the stress concentration. 6^th International Fracture Conference, 10-12 September 2003 Selcuk University-Konya, Pp. 3-10, 2003.

22. S.D. Akbarov, N. Yahnioglu, A. Turan, On the determination of the SIF at the macro-crack tips in the pre-stretched anisotrop strip. 6^th International Fracture Conference, 10-12 September 2003, Selcuk University-Konya, Pp. 11-18, 2003.

23. S.D. Akbarov, O.G. Rzayev and N. Yahnioglu, On the unnecessarity to the singular finite elements in the delamination problems. 6^th International Fracture Conference, 10-12 September 2003 Selcuk University-Konya, Pp. 19-28, 2003.

24. Akbarov S.D., Kosker R. and Ucan Y., “Stress distribution in an infinite elastic body with a periodically curved row of fibers”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 7, Letonya-Riga, May 16–20, 2004.

25. Akbarov S.D., Yahnioglu N. and Turan A., “Influence of initial stresses on the stres intencity factor at crack tips in a composite strip”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 11, Letonya-Riga, May 16–20, 2004.

26. Emiroglu I., Tasci F. and Akbarov S.D., “The Lamb problem for a half-space covered with a biaxially presetreched layer”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 54, Letonya-Riga, May 16–20, 2004.

27. Guler C. and Akbarov S.D., “Dynamical (harmonic) interface stress field in a half-plane covered with a prestretched soft layer”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 65, Letonya-Riga, May 16–20, 2004.

28. Akbarov S.D., Selim S. and Genc Demiriz I., “Stability Loss Problem of the Rectangular Thick Plate from the Composite Material with Periodically Spatially Curved Structure”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 9, Letonya-Riga, May 16–20, 2004.

29. Akbarov S.D., Tarim E.T., “Stress Analysis for a Rectangular Thick Plate made of a Composite Material with a Spatially Locally Curved Structure Under Forced Vibrations”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 10, Letonya-Riga, May 16–20, 2004.

30. Akbarov S.D., Köşker R., Simsek K. , “Stress Distribution In An Infinite Elastic Body With A Locally Curved Fiber In A Geometrically Nonlinear Statement”, Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), pp. 8, Letonya-Riga, May 16–20, 2004.

31. Akbarov, S.D., Tekercioglu, R., “Near-surface stability loss of the stratified visco-elastic half-space in a bi-axial compression”, The 12^th International Conference on Composite Engineering (ICCE-12), Tenerife, Canary Islands, Spain, 1-6 August 2005.

32. Akbarov, S.D., Kosker, R., Ucan, Y., “Stress distribution caused by anti-phase periodical curving of row neigbouring fibers in a acomposite material under geometrical non-linear statement”, The 12^th International Conference on Composite Engineering (ICCE-12), Tenerife, Canary Islands, Spain, 1-6 August 2005.

33. Akbarov, S.D., Turan, A., “The influence of the finite initial strain-state to the SIF of mode I at the crack tis in a strip”, The 12^th International Conference on Composite Engineering (ICCE-12), Tenerife, Canary Islands, Spain, 1-6 August 2005.

34. Yahnioglu N. and Akbarov S.D., “Forced vibration of the pre-stretched simply-supported strip containing two neighbouring circular holes”, The Seventh International Conference on Vibration Problems (ICOVP-2005), Isik Univerty, İstanbul-Turkey, 5-9 September, Pp. 511-518, 2005.

35. Güler C., Akbarov S.D., “On the dynamical stress field in the pre-stretched bilayered strip resting on the rigid foundation”, The Seventh International Conference on Vibration Problems (ICOVP-2005), Isik Univerty, İstanbul-Turkey, 5-9 September, Pp. 225-230, 2005.

36. Taşçı F., Emiroğlu İ., Akbarov S.D., “On the “resonance” values of the dynamical stresses in the system comprises two-axially pre-stretched layer and half-space”, The Seventh International Conference on Vibration Problems (ICOVP-2005), Isik Univerty, İstanbul-Turkey, 5-9 September, Pp. 469-474, 2005.

37. Akbarov, S.D., Tekercioglu, R., “Near-surface fracture of the visco-elastic layered composites in compression”, The 7^th International Fracture Conference (IFC-7), Kocaeli University, Kocaeli-Turkey, 19-21 October, Pp. 763–773, 2005.

38. Akbarov, S.D. and Tekercioglu, R. “Surface Instability of a System Consisting of a Moderately Rigid Substrate, Viscoelastic Bonding Layer, and an Elastic Covering Layer”, XIV International Conference - Mechanics of Composite Materials, May 29 – June 2, Pp. 7, 2006, Riga, Latvia.

39. Akbarov S.D. and Guler C. And Dincsoy E., “On the critical velocity of a moving load on a pre-strained plate resting on a pre-strained half-plane. XIV International Conference - Mechanics of Composite Materials, May 29 – June 2, Pp. 6, 2006, Riga, Latvia.

40. Akbarov S.D. and Turan A., “On the energy release rate at a crack tips in a finite pre-strained strip”, XIV International Conference - Mechanics of Composite Materials, May 29 – June 2, Pp. 8, 2006, Riga, Latvia.

41. Zamanov A.D., Suleimanov T.R. and Akbarov S.D., “Dynamic (time-harmonic) axisymetric stress field in a prestrained multilayered slab resting on a rigid foundation” XIV International Conference - Mechanics of Composite Materials, May 29 – June 2, Pp. 227, 2006, Riga, Latvia.

42. Akbarov S.D. and Turan A., “The influence of a finite initial stretching (compressing) to the energy release rate at the crack tips in a strip” , The 7^th International Fracture Conference (IFC-7), Kocaeli University, Kocaeli-Turkey, 19-21 October, Pp. 253–264, 2005.

43. Akbarov S.D., Kosker R. And Simsek K., “On the theoretical strength limit in compression of viscoelastic unidirectional fibrous composite materials”, The 7^th International Fracture Conference (IFC-7), Kocaeli University, Kocaeli-Turkey, 19-21 October, Pp. 791-800, 2005.

44. Akbarov S.D., Kosker R. And Ucan Y., “The fracture of the visco-elastic matrix containing a row unidirected periodically located fibers”, The 7^th International Fracture Conference (IFC-7), Kocaeli University, Kocaeli-Turkey, 19-21 October, Pp. 801–812, 2005.

45. Akbarov S.D. and Turan A.,”The Influence of the Initial Stresses on Stress Intensity Factor of Mode II at the Crack Tips in a Composite Strip”, Conference on Damage in Composite Materials: Simulation and Non-Destructive Testing (CDCM06), September 18-19, Pp. 116-117, 2006, Stuttgart, Germany.

46. Kosker R. and Akbarov S.D.,” Stress Distribution Caused by out of Plane Co-Phase Periodical Curving of Two Neighboring Fibers in a Composite Material” ,Conference on Damage in Composite Materials: Simulation and Non-Destructive Testing (CDCM06), September 18-19, Pp:167-168, 2006, Stuttgart, Germany.

47. Akbarov S.D. and Tekercioglu R., “Near-surface stability loss of a system consisting of a moderately rigid half-space, a viscoelastic bond and covering elastic layers in a bi-axial compression”, Conference on Damage in Composite Materials: Simulation and Non-Destructive Testing (CDCM06), September 18-19, Pp. 155-156, 2006, Stuttgart, Germany.

48. Ayhan Ozturk and Surkay D. Akbarov, Dispersion of Torsional Waves in the Compound Circular Cylinder with Initial Stresses, SIXTH INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION, Istanbul (Turkey), 22-26 August 2006, AIP Conference Proceedings Volume 899, pp. 795–795, 2007.

49. S.D Akbarov, N. Yahnioglu and O.G. Rzayev, “The delamination buckling of the elastic and viscoelastic rectangular composite plate containing a band-crack”, 8^th International Fracture Conference, 07-09 November 2007, Yildiz Technical University-Istanbul, Pp. 126-136, 2007.

50. Akbarov, S.D., İlhan, N., ‘’ The Critical Velocity of a Moving Time-Harmonic Load Acting on a Pre-Stressed Plate Resting on a Pre-Stressed Half-Plane’’ , 8^th International Fracture Conference, Yildiz Technical University-Istanbul, 07-09 November 2007, Pp. 74-83.

51. S.D. Akbarov and E. A. Aliyev, “Local near-surface failure of layered viscoelastic materials”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.5-6, 2008, Riga, Latvia.

52. S.D. Akbarov and N. Ilhan, “The critical speed of a moving time-harmonic load acting on a system consisting a prestretched orthotropic covering layer and pre-stressed half-planes”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.7-8, 2008, Riga, Latvia.

53. S.D. Akbarov A. Yildiz and M. Eroz, “Forced vibration of a prestressed bilayered plate-strip of finite length resting on a rigid foundation”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.9, 2008, Riga, Latvia.

54. S.D. Akbarov and A. Turan, “Energy release rate in a prestressed sandwich plate-strip containing interfacial cracks”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.10-11, 2008, Riga, Latvia.

55. S.D. Akbarov and N. Yahnioglu, “Delamination buckling of a rectangular composite (orthotropic) plate containing a band-crack”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.12-13, 2008, Riga, Latvia.

56. S.D. Akbarov, N. Yahnioglu and U. Yesil, “Interaction between two neighbouring circular holes in a pre-stretched simply supported orthotropic strip in bending”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.14, 2008, Riga, Latvia.

57. S.D. Akbarov, A. D. Zamanov and E. R. Aghasiyev, “Propagation of lamb waves in a sandwich plate of a compressible material with finite initial strains”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.15, 2008, Riga, Latvia.

58. E. Dincsoy, C. Guler and S. D. Akbarov, “Dynamical response to a moving load of a prestrained system comprising a substrate and bond and covering layers”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.71-72, 2008, Riga, Latvia.

59. I. Emiroglu, F. Tasci and S. D. Akbarov, “Dynamical response of two axially prestrained system comprising a covering layer and a half-space to rectangular time-harmonic forces”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.77-78, 2008, Riga, Latvia.

60. R. Kosker, S. D. Akbarov and Y. Ucan, “The effect of geometrical nonlinearity on the stress distribution in an infinite elastic body with periodically curved row of fibers”, XV International Conference - Mechanics of Composite Materials, May 26 – 30, Pp.143, 2008, Riga, Latvia.

61. Akbarov S.D. and Guliev M., “Axisymmetric wave propagation in the initially twisted circular Compound cylinders”, ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE09) November 13-19, 2009, Lake Buena Vista, Florida, USA (has been accepted).

62. Ilhan N. and Akbarov S.D., “On the dynamics of the harmonic oscillating and moving strip load acting on the system consisting on the pre-stressed covering layer and pre-stressed half-plane” , ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE09) November 13-19, 2009, Lake Buena Vista, Florida, USA (has been accepted).